The basic job of the suspension spring is to support the car and any associated loads. They also prevent brake dive, body roll, rear end squat on acceleration and generally provide an even ride. When it comes to tuning your suspension the choice is basically between lowering springs that reduce the ride height of your vehicle and performance springs that will optimise the handling of your vehicle. The suspension tuning option is down to you and your needs. Do you want your car to achieve admiring glances from onlookers when out on a cruise, if so then lowering suspension springs maybe just right for you. Alternatively if the odd weekend track event is your thing then mild performance springs will be better suited to the job.

There are three general spring designs available – Normal, Step Linear and Progressive Springs. The Normal Spring has equal spacing between each coil and the response rate is a specific designation when compressed. For example a coil spring with 200mm spacing between each coil in normal state with extra weight applied to the load will compress evenly at say 170mm apart. A further increase in the load would result in increased compression to say 150mm but again this would be even between each coil.

Read the rest of this entry »

Related posts

• Bumper Repair – Can it Be Done?
• The All New 2010 Bugatti Veyron to Feature the W16 Engine and 4 Turbochargers!
• Understanding Your Catalytic Converter